28
– 02|2017 – Subject to change.
Sportrex
Sportrex
Subject to change. – 02|2017 –
29
Adjusting the tilt of the backrest
For the backrest you can set two tilt angles by moving its upper horizontal bar:
128 degrees:
The horizontal bar is secured in the rear position.
This tilt is pre-set at the factory and is recommended for carrying small children who may fall
asleep during the journey.
115 degrees:
The horizontal bar is secured in the front position.
This more upright seating position is recommended for older children who participate actively
in the journey.
Tip!
Do not adjust the tilt during the journey as this can take some time.
To adjust the tilting degree, you will need a size 4 hex key.
f
Release the backrest’s upper horizontal bar by
removing the screws on both sides.
f
Put the horizontal bar into its new position between
the cabin frame holes.
f
Insert the screws through the holes into the horizontal bar and tighten the screws securely.
f
Tension the harnesses on the rear of the cabin, see
“Tightening the backrest” on page 16
.
Storage
To store the
Sportrex
, simply fold it up and keep it in a protected location. Pay attention also to
the instructions in the chapter
“Care” on page 30
.
Danger!
Hands or fingers can become trapped on moving parts while setting up and folding up
the cab. Carry out work carefully and keep children away from the vehicle.
f
Take position behind the cabin and open the storage
space cover.
f
Pull both sliders on the vertical cabin tubes all the way
up. This releases the lock on the rear frame rod.
f
Press the rear frame rod inwards.
f
Fold up the cabin by pressing both sides of the rear
cabin frame all the way down.
Caution!
Only fold up the cabin after it has been cleaned both inside and outside and is
completely dry.
Utilisation
Utilisation