Kidgoo 2019
Subject to change. – 06|2019 –
17
Assembly
f
Release the button on the tow bar so that the locking bolt secures the tow bar in the tow bar
mount.
f
Release the locking knob so that it jumps back into the closed position and additionally secures the
tow bar.
Tip!
You do not have to remove the tow bar completely. Simply place the tow bar into the tow
bar mount from behind to stow it under the cabin floor, see
.
Installing the jogger wheel
The Jogger Set contains of the the following components:
Right fork rod
Left fork rod
14" jogger air wheel
Wheel axle with quick release
Inserting the fork rods
You only need the fork rods when using the jogger wheel. The fork rods of the jogger wheel are secured
with a locking bolt inside the tow bar holders. The fork rods can be used in two different positions:
Jogger position: The fork rods are facing forward and are ready for use.
Standby position: The fork rods are facing to the rear and are carried under the cabin floor.
Danger!
Use the fork rods only in conjunction with the supplied jogger wheel.
f
Push the front button on the right fork rod to unlock the
locking bolt.
f
Keep on pushing down the button and push the fork rod
from the front into the tow bar holder. Make sure that the
fork rod is only pushed as far into the tow bar holder so
that the locking bolt is at the first opening of the tow bar
holder and the push button is outside the tow bar holder.
f
Release the button so that the locking pin fixes the fork rod in the tow bar holder.
f
Insert the left fork rod into the tow bar holder in the same way as the tow bar. See the section
„Mounting the tow bar“ on page 16
.
Insert the wheel axle
f
Loosen the screw of the quick release and pull it out of
the wheel axle.
f
Remove the adjusting nut and the spacer ring at one end
of the wheel axle.
