- 6 -
FIG. 10
FIG. 12
FIG. 13
FIG. 11
FIG. 14
FIG. 15
FIG. 16
FIG. 9
FIG. 8-1
8. Attach handle to motor unit. (FIG. 10)
9. Unlock the motor unit by loosening the knob (FIG. 11).
10. Pull the motor unit to the full front position, to extend the water/electric protective nose. Attach the
nose housing as shown in (FIG. 12).
C FILLING THE WATER TRAY AND DRAINING
1. Fill the tray with water. Don't add chemicals or detergents to the water.
2. To drain water from the water pan, remove stopper. (FIG. 13)
D. MAKING A STRAIGHT CUT
1. Loosen the knob, align the miter guide parallel to the fence (FIG. 14).
2. Adjust the width between the Mitre Cutting Guide and the blade by
moving the inner fence, then position the tile against the fence and
the Mitre Cutting Guide. Pull the motor unit smoothly, and do not force
the blade (FIG. 15).
E. MAKE A MITRE CUT
1. Follow the same procedure for a straight cut and loosen the nut on
the Mitre Cutting Guide, then adjust the Mitre Cutting Guide (FIG. 16).
FIG. 8-3