Qeedji NAPOE109kt, User Manual, Page: 15 / 28

15
LED behaviour
Mode
Network activity LED
behaviour
Information
Connectivity
test
On for 250 ms then off
After power unplug/replug or immediately after the dipswitch is turned from right to left.
The NAPOE109kt device is powered properly and crimped¹ on the PoE cable supporting
network data.
Connectivity
test
blinking Blinking² as soon as network activity is detected over USB-C connector.
Nominal Off
In nominal mode, the gibabit connexion LED and the network activity LED lightening are
inactivated.
² If the network activity LED is not blinking despite of an appropriate power supply leading to the test phone mobile which can not access to the
network, try again after having restarted the switch.
Mode
Gibabit connexion LED
behaviour
Information
Connectivity
test
On for 250 ms then off
After power unplug/replug or immediately after the dipswitch is turned from right to left.
The NAPOE109kt device is powered properly and crimped¹ on the PoE cable.
Connectivity
test
On
The device is connected to a network connexion supporting gigabit¹ (or behind a gigabit
switch).
Nominal Off
In nominal mode, the gibabit connexion LED and the network activity LED lightening are
inactivated.
Mode Red LED behaviour Information
Connectivity test On (steady) The NAPOE109kt device is powered properly.
Nominal Off In nominal mode, the power LED lightening is inactivated.
◬
¹ conclusion worths only when no sink device is connected.