background image

11

• Step 3: Nominal mode

State

Informa on

Green blinking: 

1

 very short flash

(300 ms) spaced 4 seconds apart

OK

Green blinking: 

2

 very short and

consecu ve flashs (300 ms)

spaced 4 seconds apart

Warning: Fail So  Mode Level 1

 

 

Frequent device reboot detected (for example 4  mes in less than ½ hour) 

 

Fail So  Mode message is wri en on the device status.xml. 

 

The instability has been caused probably by a content media not yet supported by the Gekkota OS. Consequently, to prevent any

further reboot, the content has been invalided. You are invited to remove the deficient media from your App and publish again to

go ahead. ²

Green blinking: 

3

 very short and

consecu ve flashs (300 ms)

spaced 4 seconds apart

Warning: Fail So  Mode Level 2

 

 

Frequent device reboot detected (for example 4  mes in less than ½ hour) 

 

Content is purged 

 

Fail So  Mode message is wri en on the device status.xml. 

 

The instability has been caused probably by a content media not yet supported by the Gekkota OS. Consequently, to prevent any

further reboot, the content has been invalided. You are invited to remove the deficient media from your App and publish again to

go ahead. ²

Green blinking: 

4

 very short and

consecu ve flashs (300 ms)

spaced 4 seconds apart

Warning: Check disk

 

 

The device has detected memory corrup on on content storage. The media storage is being repaired. This repair step is called

Check-Disk and its dura on can be several minutes. During this step, the “checking the file system of data par on in progress”

message is wri en on the device status.xml ³

Green blinking: 

5

 very short and

consecu ve flashs (300 ms)

spaced 4 seconds apart

Warning: errors on system par on

 

 

The user has to connect to device WebUI, go to 

Maintenance > Tools

 menu, and press bu on 

Format

 or 

Repair

 to solve the

problem. ³

Green blinking: 

6

 very short and

consecu ve flashs (300 ms)

spaced 4 seconds apart

Warning: a firmware upgrade is pending

 

 

During this phase, no content is played on the device, 

do not switch OFF the device.

Green blinking: 

7

 very short and

consecu ve flashs (300 ms)

spaced 4 seconds apart

Error: write problem on the storage

 

 

For an unknown reason, your storage space isn't usable any more. ³

Off

Error

. ¹

¹ If the problem persists in despite of an appropriate power-supply, contact 

[email protected]

.

 

² If the problem persists, it is recommended to find out the media not supported yet by the system and remove it from content.

 

³ If the problem persists a er a par on repairing, contact 

[email protected]

.

Summary of Contents for DME204










































Reviews: