Fittings:
Materials:
Specifications
Pump Volume:
.33 Ounces (10 Milliliters )
The push-in and compression fittings and tubing on the SamplePro pump are
designed to provide at least 25 lbs. combined pullout strength when used with
QED tubing. QED is not responsible for loss of the pump if non-QED tubing is
used. Re-use of the lock plate or old tube end and/or use of other brands of
tubing may significantly reduce pull-out strength and cause loss of pump in
the well.
10
Specifications
Body
-303 stainless steel
Inlet & Discharge Housing
- 303 Stainless Steel
Bladder
- Polyethylene
O-rings
- Viton
Push-inType
Air
- 1/8" (3.2 mm) O.D.
Discharge
- 1/4" (6.4 mm) O.D., 3/16" (4.7 mm)I.D.
Maximum Lift:
200 Feet (61 m)
For additional assistance contact QED Service at:
Phone:1-800-624-2026 1-734-995-2547
Fax:1-734-995-1170
E-mail:
24-Hour Service Hot Line:1-800-272-9559
IMPORTANT WARRANTY NOTE
Summary of Contents for Sample Pro 3 Inch
Page 2: ......
