12
CONTROL COMMANDS
TURN THE DETECTOR ON
Ensure the battery power lead is connected to the lead socket on
the control box
PRESS the
once to turn the detector on.
to see how to turn the QED on.
Note: The detector serial Number appears on the screen for a fraction of
a second after switch on
CYCLE THROUGH MAIN
MENU OPTIONS
PRESS either the
Button or the
button to toggle through the
Main Menu options (1-9)
TOGGLE BETWEEN A MENU
ITEM NUMBER OR ADJUST
VARIABLE
Pressing the
button toggles between displaying the menu
item number or a variable adjustment.
Note:
•
A single digit is the menu item number
•
Three digits indicates variable adjust mode
to view an explanation of the QED
Control Panel functions.
INCREASE OR DECREASE A
VARIABLE
(e.g. GRD BAL)
Press the
button to increase a variable number
Press the
button to decrease a variable number
TURN THE DETECTOR OFF
PRESS and HOLD the
button for three seconds
to see how to turn the QED off.
FACTORY RESET
Note: The factory reset can only be performed with the detector switched
OFF
PRESS and HOLD the
button, then press the
button for 2
seconds, then release both buttons.
to see how to perform a Factory reset
Note: The Factory Reset will set your THS-B to 50, which may not be your
THS-B NULL point and as a result the QED may be noisy. If this is
the case, simply adjust THS-B to NULL to quieten your QED before
readjusting other settings.
Tip:
Before doing a Factory Reset
(FR) set THS-A to anything but
30 before the detector is turned
off.
Once the detector has been
reset, if THS-A is 30 then the FR
has been done correctly.
Tip:
To quickly
get back to the MGB
adjustment screen from any
setting, momentarily push the
AGB button.
Summary of Contents for PL3
Page 56: ...56 NOTES...
