3. Setting
-16-
3.7 Remote Control
① Press ◀ button long or press
UP→DOWN→UP→MENU to run
Factory mode. Then, go to UTIL-IR
MEMORY
There are two options in IR MEMORY
as shown above; DTV and DVD.
Then you select AV source that you
want to set among them.
②
This is a window for register of
DVD’ s remote control button value.
At the moment just select a menu
that you want to save.
(Select “DTV in options of IR
MEMORY” if you want to save
values of DTV’ s remote control. And
follow the instruction below.)
Instruction>
a. Select “POWER” in OSD menu,
then press “OK” on remote control.
(as shown above)
b. If the marked area flickers as
shown above, press “POWER”
button on the remote control of
DVD that you want to use.
(continued in the next page)
Registering value of remote control buttons?
When you want to control DVD and DTV via touch screen (using OSD menu) with
other models besides already registered option-SANYO and NECVOX, you can
register value of DVD and DTV’ s remote control which you have.
Then you can control DVD and DTV via touch screen.
FACTORY mode –
Press
◀
button 5 seconds long on the remote control
