Manual for ZillioX 5
Chapter 3
SecurityEasy
Chapter 3
SecurityEasy
There are two ways to prevent unauthorized entry or use of the system:
System Password and SecurityEasy.
System Password
Set system password in the ” PASSWORD SETTING” section of the BIOS, and set the
“Password Setting” to System in the “BIOS FEATURES SETUP” section. You will be prompted
for the password every time the system boots or any time you try to enter CMOS Setup. If the
“ Password Setting” is set as “ Setup” , you will be prompted for the password only when
entering CMOS Setup.
SecurityEasy
The ZillioX 5 provides additional SecurityEasy function to protect the system from unautho-
rized entry or use.
l
Push once the button connected to the two-pin header SLEEP. If the lock function is
disabled, this button is used as SLEEP button.
l
When “ Keyboard Inactive Timer” is counted to the preset value-from 1 minute to 1
hour.
In the Lock status, the power switch and reset buttons are unresponsive, PS/2 mouse is
locked, and the Keyboard is locked except for the SecurityEasy Password entering. You
can preset the Video as blank in the LOCK status. The only way to exit the LOCK status
is to enter the SecurityEasy Password with the keyboard. This means if you set the
Lock function as enabled, you must also set the SecurityEasy Password.
Please read the notes below thoroughly.
Note 1: The Green function and the Lock function can not be enabled at the same time.
Note 2: If the lock function is enabled, you must set the SecurityEasy password no more
than 6 characters.
Note 3: When entering the SecurityEasy Password to exit the LOCK status, use the
<Enter> key located on the alphabetic pad and not the <Enter> key located on the
numeric pad.
Note 5: See also chater 4 “ BIOS Description” .
chapter 3
29
