QDI WinneX3E, Manual

Page: 35 / 55

Manual for WinneX 3E
Chapter 3
Advanced Chipset Features Setup
Figure-5 Advanced Chipset Features Menu
The following ind icate s the options for each item an d describes their meaning .
Item Option Description
l
SDRAM CAS Auto Contains the information for SDRAM initialization
Latency Time 3 procedure.
2
l
SDRAM Cycle Time 5/7
Tras/Trc 6/8
l
SDRAM RAS To CAS 2 Adds a delay time betw een the assertion of RAS
Delay 3 and CAS.
Without additional delay time.
l
SDRAM RAS 2 Default setting is suggested.
Precharge Time 3
l
System BIOS Enabled Besides conventional memory, the system BIOS
Cacheable Disabled area is also cacheable.
l
Video BIOS Enabled Besides conventional memory, video RAM area
Cacheable is also cacheable.
Disabled Video RAM area is not cacheable.
l
Memory hole at Enabled Memory hole at 15-16M is reserved for
15M-16M expanded ISA card.
Disabled Does not set this memory hole.
l
Delayed Enabled Default setting is suggested.
Transaction Disabled
l
Local Memory 100MHz Defines the local memory frequency, 100MHz
Frequency 133MHz or 133MHz.
l
Close Empty Enabled Closes empty DIMM clock or PCI clock to reduce EMI.
DIMM/PCI Clk Disabled Does not close empty DIMM/PCI clock.
l
Spread Enabled Enables Spread Spectrum to reduce EMI.
Spectrum Disabled Disables Spread Spectrum.