Manual for SynactiX 1
Front/Back Panel USB Enable (JP26&JP27, JP35&JP36)
Set JP26&27, JP35&36 as pin1&pin2 closed to enable the back panel, if they are set as
pin2&pin3 closed, then the front panel USB is enabled. Please be noted that these four
jumpers must be set as the same status.
Enable Front/Back Panel USB Device Wake-up Function (JFUSB/JUSB)
The mainboard provides the advanced USB device wake-up function. The system can be
waken up from its power saving including ACPI S3 by activating USB device. Before using
this function, set JFUSB/JUSB with pin1 & pin2 closed. Otherwise, set JFUSB/JUSB with
pin2 & pin3 closed for disabling.
Front Panel USB Port (USB3.4)
chapter 2
Front Panel
USB Enable:
JP35
1
2
3
JP36
JP27
JP26
1
2
3
JP35
JP36
Back Panel
USB Enable:
JP27
JP26
Disable:
Enable:
JFUSB/JUSB
1
2
3
1
2
3
JUSB
JFUSB
GND
1
2
3
4
5
+ 5 V
GND
D1+
D1-
GND
GND
D0+
D0-
6
7
8
9
10
+5V
