Appendix
Appendix
Appendix
Appendix
Appendix
Superb 4LE
Superb 4LE
Superb 4LE
Superb 4LE
Superb 4LE
45
Using 4/6-Channel Audio(4 Or 6 Channels Audio Interface)
(Optional)
(available on -6A, -6AL mainboard)
The motherboard is equipped with Realtek ALC650 chip, which provides sup-
port for 6-channel audio output, including 2 Front, 2 Rear, 1 Center and 1 Subwoofer
Channel. ALC650 allows the board to attach 4 or 6 speakers for better surround
sound effect. The section will tell you how to install and use 4/6-channel audio
function on the board.
Instaling the Audio Driver
The Realtek ALC650 chipset driver has to be installed before the 4-/6Chan-
nel audio function can be used. Please refer the Chapter 4 for driver installation.
Using 4-/6-channel Audio Function
You can start to use the 4-/6-channel audio function After the driver is installed
completely. The first, you can connect 4 or 6 speakers to the audio output
connector. Then open utility to set the work parameter.
Attaching speakers
To perform multichannel audio operation, connect multiple speakers to the
system. You should connect the same number of speakers as the audio chan-
nels you will select in the software utility.
2-Channel Analog Audio Output
The audio connectors on the back panel already provide 2-channel analog
audio output function. The back panel’s audio connectors can be transformed to
4/6-channel analog audio connectors automatically when you select correct set-
ting in the software utility. For information about the setting, refet to Selecting 4- or
6-Channel Setting later in the section ,Make sure all speakers are connected to
Line Out connectors. Diverse configurations for 2-, 4- and 6-channel using back
panel connectors are described below.
