Installation Instructions
Installation Instructions
Installation Instructions
Installation Instructions
Installation Instructions
Superb 4LE
Superb 4LE
Superb 4LE
Superb 4LE
Superb 4LE
8
ATX12V Power Supply Connector & Power Switch (POWER SW)
Be sure to connect the power supply plug to this connector in its proper
orientation. The power switch (POWER SW) should be connected to a mo-
mentary switch. When powering up your system, first turn on the mechanical
switch of the power supply (if one is provided), then push once the power
switch. When powering off the system, you needn’t turn off the mechanical
switch, just Push once
*
the power switch. Superb 4LE series mainboard only
support ATX12V power.
If you change “Power Button Override” from default “Instant-
off” to “Delay 4 Sec” in the “POWER MANAGEMENT SETUP”
section of the BIOS, the power switch should be pressed for
morethan 4 seconds before the system powers down.
Note:
Hard Disk LED Connector (HD_LED)
The connector connects to the case’s IDE indicator LED indicating the activity
status of IDE hard disk. The connector has an orientation. If one way doesn’t
work, try the other way.
Reset Switch (RESET)
The connector connects to the case’s reset switch. Press the switch once,
the system resets.
POWER SW
12V
12V
GND
GND
+12V
Power Supply Connector
1
ATX Power Supply Connector
2 0
1
5V
5V
-5V
GND
GND
PS-ON
-12V
3.3V
GND
12V
5VSB
5V
GND
3.3V
GND
5V
GND
PS-OK
3.3V
GND