QDI Superb 3L, Manual

Page: 36 / 59

Manual for Superb 3L
Chapter 3
l Boot up Floppy Enabled Enabled tests floppy drivers to determine whether
Seek they have 40 or 80 tracks.
Disabled Skip drive seeking to speed up system booting.
l Boot Up O n Keypad is used as number keys.
Numlock Status Off Keypad is used as arrow keys.
l Gate A20 Normal The A20 signal is controlled by the keyboard controller
Option or chipset hardware.
Fast Default setting. The A20 signal is controlled by Port 92
or the chipset specific method.
Disabled Disables the ECC function.
l Typematic Rate Enabled Enable typematic rate and typematic delay
Setting programming
Disabled Disable typematic rate and typematic delay
programming. The system BIOS will use default
value of these two items.
l Typematic Rate 6~30 Sets the speed of the typematic rate.
(Chars/Sec)
l Typematic Delay 250~1000 Sets the time of the typematic delay.
(Msec)
l Security Option System Select whether the password is required every
Setup time the system boots or only when you enter
setup.
l OS Select For Non-OS2 If your operating system is not OS/2, please select
DRAM>64MB this item.
OS2 If system DRAM is more than 64MB and the operating
system is OS/2, please select this item.
l Video BIOS Enabled Video BIOS will be copied to RAM. Video Shadow
Shadow will increase the video speed.
Disabled Video shadow is disabled.
l Show Bootup Disabled Enables the logo when system boots up.
Logo Enabled Logo will not be shown when system boots up.
l Flash Disabled Does not allow you to upgrade the BIOS.
Write Protect Enabled Note: Enabling this item can protect the
system BIOS from being attacked by severe
virus such as CIH. Therefore disable this
item item only when wanting to flash BIOS,
afterwards set this item as Enabled (default).