Manual for Superb 3L
Setting the jumper JAV as open (default), meanwhile disabling the “Flash Write Protect” item
from “BIOS Features Setup” in AWARD BIOS CMOS Setup, allows you to flash the BIOS to
the Flash ROM.
The DMI (Desktop Management Interface) system information such as the CPU type/speed,
memory size, and expansion cards will be detected by the onboard BIOS and stored in the
flash ROM. Whenever the system hardware configuration is changed, DMI information will
be updated automatically. However, setting jumper JAV as close makes flashing BIOS and
updating DMI information impossible.
Memory Configuration
This mainboard provides two168 pin 3.3V un-buffered DIMM sockets to support a flexible
memory size ranging from 8MB to 1GB for SDRAM. The following set of rules allows
optimum configurations.
l
The DRAM Timing register, which provides the DRAM speed grade control for the entire
memory array, must be programmed to use the timing of the slowest DRAMs installed.
l
Possible SDRAM DIMM memory sizes are 8MB, 16MB, 32MB, 64MB, 128MB, 256MB,
512MB in each DIMM socket.
l
Suppots Suspend to RAM.
BIOS-ProtectEasy Jumper (JAV)
The BIOS of the mainboard is contained inside the Flash ROM. If the jumper JAV is set as
close, you will be unable to flash the BIOS to the mainboard. However in this status, the
system BIOS is protected from being attacked by serious virus such as CIH virus.
JAV
JAV
Flash Write Disabled
Flash Write Enabled
Installation Instructions
