QDI P6I440LX/L6, Manual

Page: 42 / 58

BIOS Description
3 - 10
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Power Management :User Define ** Reload Global Timer Events **
PM Control by APM :Yes IRQ [3-7, 9-15], NMI :Enabled
Video Off Method :V/H SYNC+Blank Primary IDE 0 :Disabled
Video Off After :Suspend Primary IDE 1 :Disabled
MODEM Use IRQ :NA Secondary IDE 0 :Disabled
Doze Mode :Disable Secondary IDE 1 :Disabled
Standby Mode :Disable Floppy Disk :Disabled
Suspend Mode :Disable Serial Port :Enabled
HDD Power Down :Disable Parallel Port :Disabled
Throttle Duty Cycle :62.5%
VGA Active Monitor :Enabled
Soft-off by PWR-BTTN :Instant - off
Resume by Ring/LAN :Disabled
Resume by Alarm
:Disabled
IRQ 8 Break Suspend :Disabled
ESC: Quit
↑↓→←
: Select Item
F1: Help PU/PD/+/- : Modify
F5: Old Values (Shift)F2: Color
F7: Load Setup Defaults
Figure-6 Power Management Setup Menu
The following indicates the options of each item and describes their
meaning.
Item Option Description
•
Power
Management
Disabled
User Define
Global Power Management (PM) will be disabled.
Users can configure their own Power Management
Timer.
Min Saving
Pre - defined timer values are used so that all timers
are in their MAX values.
Max Saving Pre - defined timer values are used so that all timers
are in their MIN value.
•
PM Control
by APM
No System BIOS will ignore APM when Power
Management is enabled.
Yes
System BIOS will wait for APM
’ s
prompt before it
enters any PM mode e.g. Standby or Suspend.
Note: If APM is installed, and if there is a task
running, when the timer
’ s
state is time out,
the APM will not prompt the BIOS to put the
system into any power saving mode. But if
APM is not installed, this option has no
effect.
•
Video Off
Method
Blank Screen
The system BIOS will only blank off the screen when
disabling video.
V / H SYNC +
Blank In addition to Blank Screen, BIOS will also turn off
the V-SYNC & H - SYNC signals from VGA cards to
monitor.