background image

Chapter 3

                                                                                                                                      3 -

5

SpeedEasy CPU Setup

ROM PCI/ISA BIOS (2A69JQ1j)

SpeedEasy CPU SETUP

QDI Innovative Technology

CPU Model       : Pentium(R)

 

 II

Speed Mode      : SpeedEasy
CPU Speed       : 233MH

Z

Warning: Be sure your selection is
                right .CPU over speed

                 will  be dangerous!

ESC:Quit       

 

 

 

Select Item

F1: Help       PU/PD/+/-: Modify
                       (Shift) F2: Color

Figure-3 SpeedEasy CPU Setup

The following indicates the options of each item and describes their
meaning.

Item

 Option

                     Description

 CPU Model

BIOS can automatically detect the CPU model, so this item
is shown only. It could be Pentium(R) II or Intel(R)
Celeron(TM), depending on the processor chosen.

 Speed Mode

SpeedEasy

Select the CPU speed according to your CPU brand and
type.

Jumper
Emulation

This item is only for the user who understands all the CPU
parameters, i.e. System Bus frequency, “66MHz” and
multiplication of Processor Core frequency to System Bus
frequency “

×

2.5, 

×

3, 

×

3.5, 

×

4, 

×

4.5, 

×

5, 

×

5.5”.

Summary of Contents for P6I440LX/L6



























































Reviews: