Manual for P2S series
l
Onboard/CNR LAN Auto
If a CNR Interface is enabled, the onboard LAN
Selection
will be automatically disabled. Otherwise, the
onboard LAN is enabled.
Onboard
The onboard LAN is enabled.
Ext.CNR
CNR Interface is enabled.
l
Init Display First PCI Slot
Initialize the PCI VGA first.
AGP Initialize the AGP first.
l
Onboard VGA
Enabled
Onboard VGA is enabled.
Disabled
Onboard VGA is disabled.
l
Onboard LAN
Enabled
Onboard LAN is enabled.
Disabled
Onboard LAN is disabled.
l
IDE HDD Block
Enabled
Allow IDE HDD to read/write several sectors
Mode
once.
Disabled
IDE HDD only reads/writes a sector once.
l
KBC input clock
6/8 MHz
Set the PS/2 Keyboard input clock as 6/8/12
12/16 MHz
/ 1 6 M H z .
l
Power On
Button only
Power on by power button.
Function
Password
Power on with keyboard password.
l
KB Power ON
Enter
Enter keyboard password.
Password
l
Onboard FDC
Enabled
Onboard floppy disk controller is enabled.
Controller
Disabled
Onboard floppy disk controller is disabled.
l
Onboard
3F8/IRQ4
Define the onboard serial port address and
Serial Port 1/2
2F8/IRQ3
required interrupt number.
3E8/IRQ4
2E8/IRQ3
Auto
Onboard serial port address and IRQ are
automatically assigned.
Disabled
Onboard serial port is disabled.
l
UART Mode Select Normal, IrDA
Set UART mode.
A S K I R
l
RxD, TxD Active
Hi, Lo/Lo, Hi
Default is recommended.
Lo, Lo/ Hi, Hi
BIOS Description
δÃüÃû-2
02-2-19, 11:00
42
