Manual for KinetiZ 7E/KinetiZ 7E-A/KinetiZ 7E-C
Power Management Setup
Figure-5 Power Management Setup Menu
The following indicates the options for each item and describes their meaning.
Item
Option Description
l
ACPI function
Enabled
Validates ACPI function.
Disabled
Invalidates ACPI function.
l
Power
User Define
Users can configure their own Power Management
Management
Timer.
Min Saving
Pre - defined timer values are used. All timers are
in their MAX values.
Max Saving
Pre - defined timer values are used. All timers are in
their MIN values.
l
ACPI Suspend
S1(POS)
Selects the suspend type.
Type
S3(STR)
S1 is power on suspend, S3 is Suspend to RAM.
l
PM Control by
N O
System BIOS will ignore APM when Power
APM
Management is enabled.
Yes
System BIOS will wait for APM’s prompt before
entering any PM mode e.g. Standby or Suspend.
l
Video Off Option
Suspend -> Off Screen blanks after the system enters either
standby mode or suspend mode.
All Modes -> Off Screen blanks after the system enters all modes.
Always On
Screen is always on.
l
Video Off
Blank Screen
The system BIOS will only blank off the screen
Method
when disabling video.
V / H SYNC +
In addition to Blank Screen, BIOS will also turn
Blank
off the V-SYNC & H - SYNC signals from VGA
cards to monitor.
DPMS
This function is enabled only for the VGA card
supporting DPMS.
l
Modem Use IRQ
3,5,7,9,10,11 Special Wake-up event for Modem.
NA
Chapter 3