Manual for KinetiZ 7A
Overclocking Jumper Setting (JFSB)
Jumpers labeled JFSB is located on the mainboard providing users with CPU overclocking
feature. The host bus speed can be set as 100/133MHz. Refer to the chart below for the
location of these jumpers, and the table for information on how to set them.
Enable/Disable on-board audio(JSD)
If you want to use the on-board audio, set JSD with pin2 & pin3 closed (default).
Otherwise, s et JSD w ith pin1 & pin2 closed for disabling this function.
chapter 2
Normal status:
Clear CMOS:
JCC
JCC
(Unplug the AC power supply)
JFSB
1
HCLK
100
JFSB
CLOSE
OPEN
133
JFSB
1
Enable on-board audio:
Disable on-board audio:
JSD
JSD
