Chapter 3
K8N4/K8N4U
27
RAID Config
Press Enter
Press enter to set RAID device.
OnChip USB
V1.1+V2.0
Support onchip USB V1.1 and USB V2.0.
V1.1
Support USB V1.1 only.
Disabled
Invalidate all USB onboard.
USB Keyboard Support
Enabled
Support USB keyboard under legacy OS.
Disabled
Disabel this function.
USB Mouse Support
Enabled
Support USB mouse under legacy OS.
Disabled
Disabel this function.
AC97 Audio
Auto
If audio codec was installed on board, the
AC97 audio function can be used.
Otherwise, the function is disabled.
Disabled
Disable AC97 audio onboard.
MAC Lan
Auto
If LAN codec was installed on board,the
MAC LAN function can be used.
Disabled
Invalidate this feature.
IDE HDD Block Mode
Enabled
Allow IDE HDD to read/write several
sectors once.
Disabled
IDE HDD only reads/writes a sector once.
Power On Function
Password
Power on with keyboard password
.
Hotkey
Power on with hotkey
.
Mouse move
Power on with mouse move
.
Mouse click
Power on with mouse click
.
Anykey
Power on with anykey
.
Button only
Power on by power button.
keyboard 98
Power on with keyboard 98
.
KB Power ON Password
Enter
Enter keyboard password.
Hot key Power On
Ctrl-F1
Define hot key
.
... ...
Ctrl-F12
Onboard FDC Controller
Enabled
Onboard floppy disk controller is enabled.
Disabled
Onboard floppy disk controller is disabled.
Onboard Serial Port 1/2
3F8/IRQ4
Define the onboard serial port address and
2F8/IRQ3
required interrupt number.
3E8/IRQ4
2E8/IRQ3
Auto
Onboard serial port address and IRQ are
automatically
assigned.
Disabled
Onboard serial port is disabled.
