Manual for Advance 10TM
Jumper Settings
Jumpers are located on the mainboard, they represent, clear CMOS jumper JCC, enable
BIOS Protection function jumper JAV etc. Pin 1 for all jumpers are located on the side with a
thick white line ( Pin1
→
), refer to the mainboard’s silkscreen. Jumpers with three
pins will be shown as to represent pin1 & pin2 (“1-2”)connected and
to represent pin2 & pin3 (“2-3”)connected.
Installation Instructions
FSB Frequency Selection(JFSB1, JFSB2)
The jumpers JFSB1 and JFSB2 provide users with FSB frequency selection. If they are set
as “Auto”, the system will detect the CPU FSB speed automatically. If they are set as
“Jumper”, the CPU FSB speed can be set by jumpers manually.
FSB SETTING
Auto (Default)
Jumper
JFSB1
JFSB2
Close
Close
Open
Open
JFSB2
JFSB1
1
1
2
2
3-pin
2-pin
set pin1 and pin2 closed
Symbol
Jumper
set the pins closed
set pin2 and pin3 closed
set the pins opened
Description
