Manual for Advance 10T
Infrared Header (IrDA)
This connector supports Infrared transmitting and receiving. If using this function, set
UART2 Mode to HPSIR or ASKIR and configure the settings in the INTEGRATED PERIPH-
ERALS section of the BIOS.
Audio/Modem Riser Slot (AMR) & AMR Sound Option(JSD)
(Jumper JSD is available on Advance 10T-A)
The AMR Interface Connector is the interface between the mainboard and the Audio/
Modem Riser card. The connector provides all necessary signals which supports several
different configurations of audio and modem in the system, such as audio and modem on
the riser, audio on the mainboard and modem on the riser, or no audio with modem on the
riser. Either AMR (Audio/Modem Riser) card or MR (Modem Riser) card can be used on this
system. To avoid conflict, the onboard audio can be disabled in BIOS when using AMR
Audio Riser card.
Chapter 2
Enable AMR Primary Sound
Disable AMR Primary Sound
JSD
Pin2-Pin3 closed
1
1
JSD
Pin1-Pin2 closed
Enable Onboard Audio
Disable Onboard Audio
2
3
2
3
AMR Slot
Note: The Advance 10T mainboard supports Primary AMR card only.
VCC
CUT
IRRX
GND
IRTX
VCC
1
Infrared Header
