QDI ADVANCE 10F, User Manual

Page: 40 / 61

Manual for Advance 10B/Advance 10F
l Soft-off by Instant-off The system will power off immediately once the
PWRBTN power button is pressed.
Delay 4 Sec The system will not power off until the power
button has been pressed continuously for more
than 4 seconds.
l Modem Use IRQ 3,5,7,9,10,11 Special Wake-up event for Modem.
NA
l Wake Up Events Press Enter set the following items.
l USB Resume from Enabled When system enters S3 state, USB can be waken
S3 up.
Disabled
l VGA on VGA active reloads global timer.
Off VGA active has no influence to global timer.
l
LPT&COM LPT/COM Set the options of these items to reload global
HDD&FDD timer.
PCI/master Off/On
on/off
l PowerOn by PCI Enable Allows any event occurring to the DMA controller
Card will awaken a system which has been powered
down.
Disable Disables power-on by PCI card.
l Wake up On by Enabled Allows the system to be powered on when a ring
Ring/ LAN indicator signal comes up to UART1 or UART2
from an external modem or comes up to WOM
header from an internal modem card, or when a
remote wake up signal comes up to the WOL
header from LAN adapter.
Disabled Does not allow wake up on LAN or wake up
from internal/external modem.
l RTC Alarm Enabled RTC alarm can be used to generate a wake event
Resume to power up the system which is in power-off
status. You can set any date or any time to
power up the system.
Disabled RTC has no alarm function.
l Primary INTR O n Allows wake up from IRQ.
Off Does not Allows wake up from IRQ.
l IRQs Activity Press Enter
Reloads global timer.
Monitoring
36
Award BIOS Description