BASIC OPERATIONS
!
NOTE
When the battery pack voltage becomes too low, transmission will stop
and an alert tone will sound. See “Low Battery Warning” on page 18
1. Turn the
Power switch / Volume
control clockwise to switch the
transceiver power ON
•
A beep sounds if enabled by your
dealer
2. Press the key programmed with the
Monitor
or
Squelch Off
function to
hear background noise, then release
the
Power switch / Volume
control to
adjust the volume
3. Rotate the Channel selector to
select your desired channel.
•
When you receive an appropriate
signal, you will hear audio from the
speaker.
4. To make a call, press and hold the
PTT
switch, then speak into the
microphone using your normal
speaking voice.
•
Hold the microphone approximately
1,5 inches (3-4 cm) from your lips.
5. Release the
PTT
switch to receive.
