QCT QuantaGrid Series, Service Manual

Page: 109 / 167

BMC C
ONFIGURATION
G
ROUP
4-30
Procedure:
Table 12: DNS Server Settings Page
I
TEM
D
ESCRIPTION
Host configuration
Host Settings Choose either Automatic or Manual settings.
Host Name
It displays hostname of the device. If the Host setting is chosen as Man-
ual, then specify the hostname of the device.
Register BMC
Register BMC To enable/disable Register BMC.
Domain Name Configuration
Domain Settings
It lists the option for domain interface as Manual, v4 or v6 for multiLAN
channels.
Note:
If you choose DHCP, then select v4 or v6 for DHCP servers.
Domain Name
It displays the domain name of the device. If the Domain setting is cho-
sen as Manual, then specify the domain name of the device. If you chose
Automatic, the Domain Name cannot be configured as it will be done
automatically. The field will be disabled.
Domain Name Server Configuration
DNS Server Settings:
It lists the option for DNS settings for the device, Manual and available
LAN interfaces. If you choose Manual setting, you have to configure the
DNS Server IP addresses. If you have chosen DHCP, then you have to
select the interface from which the IP address is to be received.
IP Priority
If IP Priority is IPv4, it will have 2 IPv4 DNS servers and 1 IPv6 DNS server.
If IP Priority is IPv6, it will have 2 IPv6 DNS servers and 1 IPv4 DNS server.
Note:
It is not applicable for Manual configuration.
DNS Server1, DNS Server2 and
DNS Server3
Specify the DNS (Domain Name System) server address to be config-
ured for the BMC.
 IPv4 Address made of 4 numbers separated by dots as in
"xxx.xxx.xxx.xxx".
 Each number ranges from 0 to 255.
 First number must not be 0.
DNS Server Address will support the following:
 IPv4 Address format.
 IPv6 Address format.
Note:

If IP Priority is IPv4 then DNS Server1 , DNS Server2 will be IPv4
and DNS Server3 will be IPv6.
 If IP Priority is IPv6 then DNS Server1 , DNS Server2 will be IPv6
and DNS Server3 will be IPv4.

If no IP, DNS Server field will be empty.
Save To save the entered changes.
Reset To reset the entered changes.