10
(10) PLACING TOP PANEL
1. Open Sliding Doors located on the Top Panel.
2. Put the Top Panel on the assembled panels.
3. The Top Panel must be positioned so that the Cables on the Top Panel are in the front-left corner,
right above the stereo.
4. Place the heater wires on the top of the back panel & front panel through the holes on the Top
Panel
5. Gently place the Top Panel onto the rest of the assembled panels. When all four corners are in
place, gently push down the Top Panel until it is snuggly fit over the rest of the panels.
6. Make sure that the cables around the corners do not get pinched between the panels.
(11) POWER SUPPLY CONNECTIONS
The power supply connector is like this
：
1. Open the Sliding Door located on the top panel and connect plugs from heaters to control pack.
2. Please connect the power supply cord to heating units as follow pictures:
Summary of Contents for TheraSauna Classic Series
Page 1: ......
Page 2: ...0...
Page 19: ...17 3 Person Corner Model Top Panel...
Page 24: ...22...
