4
19
4-4 Chinese Keyboard Input Mode
When user wants to input Chinese, he must select the Chinese keyboard input mode. By default,
the system selects the English input mode. To switch to the Chinese keyboard mode, run the ap-
plication program and "repeatedly" press <Ctrl> + <Shift> keys together to switch among different
input modes. The current input method will be displayed in the lower right corner of the screen as
shown below.
4-5 Network Connection
1. Wired Network Connection Setup
1.1 If the RJ-45 cable is connected normally, but the network icon in the system tray shows no
connection, right-click the Network icon, make sure the “Enable Networking” is enabled, then
click “Start” > “System” >”Administration” >”Network”, select the eth0 item and click “Activate”
button.
1.2 Click the network icon in the system tray, and select “System eth0” to enable the
connection, after this is completed, the network is established.
2. Wireless Network Connection Setup
Before using the wireless network, you can configure it to meet your needs. If you use the default
setup, please operate from step [2.6] below.
If there is no the “Keyboard Icon” in the system tray, you can click
“Start” > “System” >
“Preferences”> “Personal” > “Input Method” to enable it
.
C
AU
TI
O
N
!
Summary of Contents for N700
Page 1: ...QBOX User s Manual...
