1.5W Fairy
1.The switch is cut-off switch, this lamp can get solar charged in any mode.
2.This is a solar powered lamp, please install it in a location where can get
enough sunshine.
3.Please kindly note the lighting time depends on sunshine duration and
weather.
4. The lamp will light up automatically at dusk and off at dawn.
5. Built-in IC is with over-charge, over-discharge and over-voltage protection.
6. The lamp is equipped with an internal lithium battery, which is replaceable.
If any need, please contact seller for correct new battery.
7. If the battery is taken out and put back in or replaced with new ones, please
toward the solar panel to sunshine or a strong light to activate the lamp.
8. Non-professional please do not disassemble the lamp.
9. Please do not dispose the battery with household garbage to avoid
explosion.
Measure card
Expansion plug
Notch
Screw
Button
1
2
3
4
5
1. Please use measure card to drill 2 holes of
Φ
6mm in correct position.
2. Fix 2 expansion plugs into the holes.
3. Fix screws to the expansion plugs with a spare space.
4. Hang the notch onto the screws and fasten the lamp.
5. Press the button to turn on the lamp.
1.5W
Global Patent Design with Front & Back Light
Please read and follow all instructions to operate.
Save this manual for future reference.
INSTRUCTION MANUAL
INSTRUCTION MANUAL
Rana WL PIR LUX LED Solar 1.5W
102193
Installation
Notice
