serviceable parts inside. 2) Before touching the lamp or replacement of
the bulb, please switch off first and then let it cool 3) Any replacement
of bulb, please Switch power off.
TECHNICAL DETAILS:
Voltage:
230 V~ 50 Hz
Wattage:
Max. 60 Watt for incandescent
Detection range: Approx.110º (horizontal), Max. 10 meters adjustable
Duration time: from (10±5) seconds to (4±1) minutes adjustable
LUX control level: from daylight to night adjustable
Weatherproof: IP44
Class I protection
Rubber Power Cord must be used for outdoor light, such as H05RR-F
3G 0.5mm².
Trouble shooting and user hints
4
PROBLEM
POSSIBLE CAUSE
SUGGESTED REMEDY
Lamp does not switch
on when there is
movement in the
detection area.
1. no mains voltage
Check all connections, and
Fuses/switches
2. near by lighting is too
bright.
Relocate the unit
3. controls set incorrectly
Readjust control knob
4. sensor positioned in wrong
direction
Relocate the unit
Lamp switches on for
no apparent reason
(false trigger)
1. heat sources such as
air-con, Vents, heater flues,
barbecues, other outside
lighting, moving cars are
activating sensor.
Away from heat sources.
2. animals/birds e.g. possums
or domestic animals.
Away from the area which
animals often pass through .
3. interference from on/off
switching of electric fans or
lights on the same circuit as
your security floodlight. (this
problem does not always
occur but a faulty switch or
noisy fluorescent light may
cause the security floodlight
to switch on.)
Should the false triggering
become, troublesome, consider:
a) replacing a faulty switch.
b) Replacing noisy fluorescent
Tubes and/or starters.
c) connecting the global lamp to
a separate circuit(in most cases
where one or more of the above
suggestions have been carried
out, false triggering has been
reduced.)
4. reflection from swimming
pool, or reflective surface.
Relocate the unit.
Light remains on.
1. continuously false
triggered
See above mentioned
2. time is set too long.
Reduce time
Light switches on
during daylight hours.
LUX control knob is set to
daylight position.
Turn the LUX control knob to
desired light level setting.
When setting controls
in daylight the
detection distance
becomes shorter.
1.interference by sunlight
Re-test at night.