Qazqa 89522, Manual

Page: 3 / 12

1) General

Before carrying out any work on the fan, disconnect it from the electrical supply!

Check if the electrical specifications of this appliance are compatible with your installation. The
suppler accepts no responsibility for any physical injury or material damage resulting from
incorrect use or installation of this fan. If you have the slightest doubt, please contact electrician
。

Unauthorized use and technical modifications to the appliance can lead to danger to life and health.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure
that they do not play with the appliance

Children should be supervised to ensure that they do not play with the appliance.

This appliance is for indoor use only.

Means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.

Never install the appliance in a moist or wet room.

Be careful when working near the rotating blades. The fan should be installed at least a height of 2.3m

Before pushing the reversible slide switch, it is necessary to stop the action of the blades by turning off the fan
 Don’t place your arm or other object in the path of the blades, when the fan is operating.

Always maintain the minimum distance between the lamp and any inflammable material (curtains, wall
etc), as indicated on the pictogram

Means for all poles disconnection having a contact separation that provide full disconnection under over voltage
category III conditions must be incorporated in the fixed wiring in accordance with national wiring rules.

Power supply wire from ceiling needs 1.5 sq mm wire
Warning: Before obtaining access to terminals, all supply circuits must be disconnected.
P.3