QASAIR Installation Instructions
23
The Thermidor rangehood is designed to be built into the ceiling.
installation instructions
1.
Remove hood from packaging being careful not to touch the stainless steel front.
2.
Locate centre of stove and using level or plumb line, mark centre line up to the ceiling.
3.
In a new house the hood can be fixed into the ceiling space by bolting or screwing into the ceiling
joists or by building a frame to support the hood.
4.
In an existing home, a hole must be cut into the ceiling and pushing the hood into the space. Ensure
there are no obstructions to placing the hood in position. In these cases a ceiling flange in stainless
can be supplied to finish the hood to the ceiling. It is not supplied in colours.
5.
The outlets are either top or back ducted and can be changed on site and the hood can be reversed
to suit the intended ducting direction.
6.
Once secure in position standard ducting pieces can be used.
7.
Switches are not provided and remote switching in a convenient position must be installed. The
switching used must be an electrically approved switch and is not provided by
Condari Pty Ltd.
instructions
f
o
r models
TR CT 1000-3
TR CT 1200-3
TR CT 1500-3
TR CT FLANGE 1000
TR CT FLANGE 1200
TR CT FLANGE 1500
