27
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference and
2) This device must accept any interference received, including interference that may
cause undesired operation of the device.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating instructions
for satisfying RF exposure compliance. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
RF STATEMENT
Medical Electrical Equipment needs special precautions regarding EMC and needs
to be installed and put into service according to the EMC information provided in
the following section.
Interference may occur in the vicinity of equipment marked with the
following symbol .
Portable and mobile RF communication equipment (e.g. cell phones) can
affect Medical Electrical Equipment.
The use of accessories and cables other than those specified may result in
increased emissions or decreased immunity.
The device uses RF energy only for its internal function. Therefore, its RF
emissions are very low and are not likely to cause any interference in nearby
electronic equipment.
The device is suitable for use in all establishments, including domestic establishments
and those directly connected to the public low voltage power supply network that
supplies buildings used for domestic purposes.
Portable and mobile RF communications equipment should be used no closer to any
part of the device, including cables, than the recommended separation distance
calculated from the equation applicable to the frequency of the transmitter.
The device is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. Any other accessories, transducers and cables may result
in increased emissions or decreased immunity and EMC performance.
The device should not be used adjacent to or stacked with other equipment and that if
adjacent or stacked use is necessary, which should be observed to verify normal
operation in the configuration in which it will be used.
Medical Electrical Equipment needs special precautions regarding EMC and needs to
be installed and put into service according to the EMC information provided in the
following. Portable and mobile RF communication equipment (e.g. cell phones) can
affect Medical Electrical Equipment. The use of accessories and cables other than
those specified may result in increased emissions or decreased immunity of the unit.
