iQube V2 user instructions
The iQube V2 is designed to work with chargeable batteries. The batteries are non-user replace-
able. Opening the unit by non-qualified persons will void the manufacturers warranty
DO NOT install non-chargeable batteries and connect the unit either to USB or a charger/wall
adapter. This will cause injury. Non-chargeable batteries may explode when charged.
The iQube will not work properly when there are no batteries installed. Batteries must always be
installed for a proper functioning!
Controls
FIG 7
Front view
Controls from the left to the right:
ON/Off Switch:
•
I indicates the On position.
•
O indicates the Off position.
Power LED I:
This LED indicates power on.
In case this LED flashes it indicates that the batteries are getting low/empty. In that case the
batteries should be replaced or charged.
In case of low batteries the performance of the iQube might degrade or clipping might occur.
Volume:
This controls the volume output of the iQube. Turn fully counter clockwise for reducing the volume
to zero. Turn clockwise to increase the volume.
Summary of Contents for iQubeV2
Page 1: ...User Manual...