Q.VITEC ANPVC 1040D, Manual

Page: 11 / 28

Table of contents
11
1.1.2
Connecting Cameras to the Imagechecker
To hook up a camera, connect it to the frame grabber camera connector via the camera cable
(PoCL). Please read the notes below prior to operating any of the cameras.
 Only use the cameras and camera cables recommended by Q.VITEC.
 Please refer to our homepage for a lens selection table:
http://www.qvitec.de
 Do not twist or bend the camera cables forcibly or apply load to the
connector joints.
 Do not touch the CCD element or the lens surface of the camera. Attach
the lens cap to keep off dust when not in use.

When removing the cable from the connector, be sure to hold it by its
plug to prevent excess force applying to the cable.
 Do not touch the terminals inside the connector of cameras and camera
cables and take care not to allow foreign objects to come into the con-
nectors.