5
What’s in the Box
(1x)
SPA-Qf 60x2
SPA-Qf 60x4
(1x)
AC Power Cord
(Type varies by region)
(2x)
Rack Ear
CH-001344-00
(2x)
Joining Plate
QSC P/N
CH-001345-00
(2x)
Rack Ear Spacer
CH-001386-00
(6x)
Phillips Pan Head M4 x 7 mm
(6x)
Phillips Flathead M3 x 6 mm
(4x)
Foam Spacer
PL-001023-00
(1x)
Rack-Ear Cover Label
LB-001138-00
SPA-Qf 2-channel (2x, inc. 1 spare)
SPA-Qf 4-channel (3x, inc. 1 spare)
Euro Plug 3.5 mm,
4 pos, green
CO-000649-00
(3x, inc. 1 spare)
Euro Plug 3.5 mm, 3 pos, blue
CO-000929-01
(1x)
Euro Plug 3.5 mm, 6 pos, black
CO-000928-01
(1x)
Warranty
TD-000453
(1x)
Safety Information
TD-001663
Introduction
Q-SYS SPA-Qf Series network amplifiers continue the Q-SYS trend of empowered peripherals with a solution that not only delivers low-
power amplification to smaller spaces such as meeting and conference rooms, but also supports flexible Q-SYS system configuration
and control. With the addition of configurable GPIO, two flex channels (configurable as either mic/line inputs or line outputs) and
70Vrms/100Vrms bridge outputs, the Q-SYS SPA-Qf 60x2 (two channel) and Q-SYS SPA-Qf 60x4 (four channel) provide the utility to
extend your processor’s connectivity across more spaces, all within a Q-SYS native network amplifier.
NOTE:
SPA-Qf Series amplifiers require a Q-SYS Core processor and Q-SYS Designer Software (QDS) version 9.8
and later for configuration and operation. Information about the QDS components related to the SPA-Qf Series amplifiers,
including their properties and controls, can be found in Q-SYS Help at help.qsys.com. Or, simply drag an SPA-Qf
component from the Inventory into the Schematic and press F1.
