Part 5 – Accessing the DVR menus
Press the MENU key which will bring up the LOGIN screen shown as Pic 5.1 and enter the user name and password which is admin
r
and 123456 by default. This will bring up the SYSTEM screen in Pic 5.2. Use the Direction Keys (number 5 on the Front Panel diagram
in Part 2) to move the cursor and ENTER key (number 6) to select. Select the BASIC option (RED square in Pic 5.2) and it will display
the screen in Pic 5.3 where you set time and date and enable audio and password check. On the SYSTEM screen you use the LIVE
option to adjust the camera images, the RECORD option (Pic 6.2) to set up resolution, frame rate, video quality and enable cameras fo
recording, the PTZ option to set up Pan-Tilt-Zoom cameras, the USER option to set up users on the system, the NETWORK option to
setup the unit for remote access, and the TOOLS option to access hard drive information, update firmware, and restore system
defaults. Refer to Chapter 3 of the user’s manual for more information on the SYSTEM menu.
Pic 5.1
Pic 5.2
Pic 5.3
Part 6 – Setting up DVR to record
There are 4 modes for recording: manual, schedule, motion detection, and external sensor. In this Quick Start Guide we will cover manual,
on
schedule, and motion detection. If you want to use external sensor alarms refer to sections 2.3.2 and 3.3.5 of the user’s manual for informati
on how to set these up. To setup any type of recording you need to select RECORD in the SYSTEM menu (RED square in Pic 6.1) which will
bring up the RECORD screen (Pic 6.2). Here you can enable recording on the channels you want to record (RED box in Pic 6.2) and select the
quality, frame rate, and resolution for each camera.
Pic 6.1
Pic 6.2
D key (number 16 on Front Panel in Part 2). It will start
ed
to SYSTEM menu. Use the Direction Keys (number 5 on Front Panel in Part 2) to select SCHEDULE (RED
ns
1. Manual Recording:
d enabled the cameras you want to record, push the RECOR
Once you have setup an
recording and will continue recording until you push the STOP key (number 21 on the Front Panel in Part 2). If the system is password protect
it will ask for a password to stop recording.
. Time Schedule Recording.
2
Follow instructions in Part 5 to go
box in Pic 6.3) and hit ENTER (number 6 on Front Panel in Part 2). This will display the screen in Pic 6.4. Use the Direction Keys to go to the
SCHEDULE option (RED square in Pic 6.4) and use the ENTER key to put a checkmark in the box. Then use the Direction Keys and ENTER
key to select or de-select the hours of each day you want to have the cameras record. Green means the hour is enabled and transparent mea
it is not enabled. Select OK to save the settings. Repeat this procedure for the other cameras.
Pic 6.3 Pic 6.4
