Q-See QD7015P, User Manual

Page: 14 / 16

14
EXAMPLE 1: SETTING A CRUISE
This example is based on using a QT-Series DVR without an attached PTZ keyboard. Your
DVR’s specific commands may differ slightly. Please consult your system’s manual.
STEP 1. In your DVR’s PTZ settings
window, select the Advanced tab and
then Preset 1 .
STEP 2. Rotate the camera to the desired
position using the arrow controls.
STEP 3. Click
Save
STEP 4. Select Preset 2 .
STEP 5. Rotate camera to desired
second location.
STEP 6. Click Save
You may repeat Steps 4-6 for additional
positions if desired.
STEP 7. Return to the PTZ window and
click on the Cruise button for your
channel.
STEP 8. Click
Add
.
STEP 9. Double-click on the new cruise
setting to begin loading your presets.
STEP 10.
Click on the + button to open
the Preset pop-up window and select
your starting preset point, speed and
stop time.
Speed : 1-8 with 8 being the fastest
Time
: This is the time the camera will
stay pointed at this location.
Serial Port Serial Port Advanced Advanced
P.T.Z P.T.Z
Default Default
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Setting Setting
Apply Apply Exit Exit
CH Preset Cruise Track
1
2
3
4
5
6
7
8
CH Preset Cruise Track
1
2
3
4
5
6
7
8
Save Save
Zoom
Focus
Iris
Zoom
Focus
Iris
Speed: 5 Speed: 5
No. No.
1 1
02 02 01 01 03 03 04 04 05 05 06 06 07 07 08 08 All All
Start Track Start Track
Start Auto Scan Start Auto Scan
Start Cruise Start Cruise
Preset
Cruise
Preset
Cruise
Speed: 5 Speed: 5
preset 101 preset 101
02 02 01 01 03 03 04 04 05 05 06 06 07 07 08 08 All All
Zoom
Focus
Iris
Zoom
Focus
Iris
STEP 11. Repeat for each preset - up to a maximum of 16 per cruise.
STEP 12. Click
OK
save your settings and close the windows until you reach the PTZ
Settings window. Click Apply to save all of the settings.
STEP 13. Open the PTZ controls from the Control Bar, select your cruise in the pull-down
and click to begin.
EXAMPLE 2: SETTING A TRACK
An alternate method is to utilize the Track settings - also found in the Advanced tab. Click
the Track button for the right channel, use the directional controls to point the camera at your
desired starting point and then click Start Record . The DVR will then record your movements,
including delays at selected spots. Click Stop Record to end. Clicking on Start Track in the
PTZ control window will start the camera on its track.