Q-See QC818 User Manual Download Page 15

28

29

IMPORTANT!

 

It is highly recommended that you change your system 

password after you complete the setup of your system to ensure the security 
of your system. Record your changes and keep that information stored 
securely as the system will prevent access if the incorrect login information 
is attempted three times within a 30-minute period. If you find yourself locked 
out of the NVR because of this, wait 30 minutes, reboot the NVR and attempt 
to log into it again.

Using the mouse or remote control, select your user name and enter your password. 
Whenever the cursor is over a text field, a keyboard icon will appear to the right. Clicking 
within the field itself will open the virtual keyboard as explained in 

Section 2.2

. Clicking on 

the keyboard icon allows you to cycle between numbers, letters (upper and lower case) and 
symbols when appropriate. 
Until new accounts are added, there are two pre-configured accounts available to users who 
log into the NVR:

•  Administrator (local and network) User name: 

admin

 Password 

admin

•  User name 

user

 Password 

user

You must have access rights – whether as the system administrator or logged-in user – 
in order to change settings. See 

Account 

in

 Section 4.4

 for information regarding user 

accounts. 

SYSTEM LOGIN

User Name

Password

admin

1 2 3

5

4

6

8

7

9

0

! ? @ # $ % ^ + * - _

q w e r

t y u i o p |

a s d f g h j k l

; Enter

z x c v b n m ,

.

Shift

3.3 LOGIN, LOGOUT AND MAIN MENU

LOGIN

When the NVR starts up, the default video display is multiple window mode. Right-clicking the 
mouse or pressing the 

Enter

 button on the front of the NVR will bring up the 

Shortcut Menu 

(covered on the next page)

 

allowing you to select an action, however before you can access 

certain functions, the 

System Login

 screen will open to allow you to log in. 

PICTURE 3-5

Once you have logged in, the NVR will display one or more camera channels in Live View. 
How many channels are displayed will depend on how many cameras you have connected as 
well as what multi-view mode you have chosen. 
After a period of inactivity – configurable in the 

General Setting

 submenu described in 

Section 4.3

 – the NVR will log users out. This will require the current user to re-enter their 

password.

SHORTCUT MENU

In 

Live View

 mode, right-clicking anywhere 

on the screen will bring up the 

Shortcut 

Menu

This menu allows you to quickly change your 
viewing mode as well as moving directly to 
a selection of menus, including the 

Main 

Menu

.

View

 - This allows you to view a group of 

cameras on screen at the same time. The 
number of cameras available will depend on 
how many cameras your NVR will support. 
The shortcut menu on a 4-channel NVR 
will not offer the 8, 9 or 16 camera options, 
for example. The arrows to the right of the 
options will allow you to select specific 
cameras.

PICTURE 3-6

View 1

View 4

View 8

View 9

View 16
Pan/Tilt/Zoom

Auto Focus

Color Setting
Search

Record Status

Tour Setup

Remote Device

Alarm Output

Main Menu

Pan/Tilt/Zoom

 - This will take you directly to the 

PTZ Control

 window (

See Section 5.1

). 

The controls will only work with PTZ cameras.

Auto Focus

 - This option  will only work with cameras equipped with auto focus. This feature 

is not available on all models.

Color Settings

 - You can adjust the camera’s brightness, color balance, contrast and other 

aspects to best suit its operating environment. These changes can be made using the sliders 
or by selecting a pre-generated color mode.

Search

 - This opens the 

Search and Playback 

window (

See Section 3.5

).

Record Status

 - This opens the Recording Status window which shows how each camera 

is programmed to record. It allows the user to quickly change the current status of each 
camera.  (

See Section 3.4

).

Tour Setup

 - This is a shortcut to the 

Tour Setup

 window located in the 

Display

 window. 

This window is used to create a “tour” of channels that your NVR will cycle through. See 

Display

 in 

Section 4.3

 for more information.

Remote Device

 - This opens the 

Remote Device

 window which allows you to access IP 

cameras which are located on a different network from your NVR. (

See Section 4.5

).

Alarm Output

 - This will take you to the 

Alarm Output

 menu - which is also available 

through the Advanced Menu. This menu allows you to change how the alarms operate as well 
as check on their status. 

See Chapter 6

 for full details.

Main Menu

 - This opens the 

Main Menu

 - see below.

Summary of Contents for QC818















































Reviews: