22
23
SHUTDOWN
Selecting the Shutdown icon in the Main Menu will open the Shut Down window.
This window allows you to choose to log out
as a user, shut down the system, restart the
system or switch users.
In addition, the NVR can also be shut down
by pressing on the front panel power button
for three seconds. The system will stop
operating and it can then be turned off via the
Power
button on the rear of the NVR.
PICTURE 3-7
PICTURE 3-8
PICTURE 3-9
SHUTDOWN
Password is needed to re-enter the menu
after logout.
Logout menu user
OK
Cancel
AUTO RESUME
In the event of a power failure, the NVR will automatically save any video files it is currently
recording and will then resume scheduled operations once power is restored.
3.4 RECORDING
Your NVR is factory set to record when motion is detected. You can override this in the
Record
menu, as discussed below, or you can schedule the hours when the NVR captures
motion. For information on how to set recording schedules and motion detection recording,
please see
Sections 3.6 and 3.7
.
MANUAL RECORDING
This window allows you to override the scheduled recording times of selected cameras. You
can access the
Record Menu
via the
Shortcut menu
or by pushing the
Record
button on
the remote.
There are three status modes:
Schedule
,
Manual
and
Stop
. The status of each channel is
shown by the filled circle under its number. Each camera can only have one status at a time.
Changes take effect once the
OK
button is selected.
Manual
– The selected cameras will begin
recording
Schedule
– Cameras record based on your
settings made in the
Schedule Menu
or
Detect Menus
(
See Sections 3.6 and 3.7
respectively)
Stop
– All selected cameras stop recording
You can assign the same values to all
cameras by selecting the desired status in the
“
All
” column.
OK
Cancel
ALARM OUTPUT
ALARM TYPE All
1 2 3 4
Schedule
Manual
Stop
Status
Once you have logged in, the NVR will display one or more camera channels in Live View.
How many channels are displayed will depend on how many cameras you have connected as
well as what multi-view mode you have chosen.
After a period of inactivity – configurable in the
General Setting
submenu described in
Section 4.3
– the NVR will log users out. This will require the current user to re-enter their
password.
IMPORTANT!
It is highly recommended that you change your system
password after you complete the setup of your system to ensure the security
of your system. Record your changes and keep that information stored
securely as the system will prevent access if the incorrect login information
is attempted three times within a 30-minute period. If you find yourself locked
out of the NVR because of this, wait 30 minutes, reboot the NVR and attempt
to log into it again.
MAIN MENU
SEARCH
INFO
SETTING
ADVANCED
BACKUP
REMOTE DEVICE
SHUTDOWN
SHORTCUT MENU
In
Live View
mode, right-clicking anywhere
on the screen will bring up the
Shortcut
Menu
.
This menu allows you to quickly change your
viewing mode as well as moving directly to
a selection of menus, including the
Main
Menu
.
MAIN MENU
After logging in, you can view – and access -
the NVR’s functions through the Main Menu.
There are seven submenus available;
Search
,
Info
,
Setting
,
Remote Device
,
Advanced
,
Backup
and
Shutdown
. Clicking on an icon
will take you to that function or the submenu
it represents.
PICTURE 3-5
PICTURE 3-6
View 1
View 4
View 8
View 9
View 16
Pan/Tilt/Zoom
Color Setting
Search
Record
Remote Device
Alarm Output
Main Menu
