■
Direct mounting type
Q100L
Series
PCD 60, Ø5x3
▪
fix the product by using Nuts(M4-3EA) attached on mounting bolt
on the bottom of the product.
■ Wall mounting type
Q100LW
Series
PCD 55, Ø6x4
■ POLE mounting type
Division
Q100LP
Series
Standard
SCREW & NUT 18mm
L-type bracket
LB24
Wall bracket
LW24
Round Bracket
SZ24
Folding round Bracket
SL24
■ POLE mounting type detailed specification
In case of pole mounting method, there are mainly 5 types
according to purpose or condition of mounted place. And
please mount it according to the kinds of mounting bracket by
refer to below contents.
Model
Dimension
24mm
SCREW & NUT
(Standard types)
LB24
LW24
SZ24
SL24
There is built-in Switch to select Steady/Flashing operation on the
assembling circuit board for convenience of user. Refer to the
following drawing and explanation for right operation.
1) Lens Removal
Remove lens by turning it counterclockwise and make sure
related parts on the assembling board.
2) Selecting Steady/Flashing Type
Choose steady light or flashing light by using Steady/Flashing
Selecting switch(1)- SELECTOR(1). “L” mode of the switch is for steady
type and “LF” mode is for flashing type.
3) Lens Assembling
Assemble the product in reverse order of separating.
▪
If using voltage is seriously higher or lower than rated voltage, it
can reduce the self-life of the product or can cause a problem on
Selecting Steady/Flashing Type
