Q Imaging RETIGA LUMO User Manual Download Page 2

Page: 2 / 28

RETIGA LUMO

™

USER MANUAL

www.qimaging.com

Applicability

This document applies to the QImaging Retiga LUMO camera. For the latest updates, please visit

www.qimaging.com

Notice of Copyright

Copyright © 2017 Quantitative Imaging Corporation. All rights reserved. Unauthorized duplication of this
document is prohibited.

Trademarks and Proprietary Names

QImaging and Retiga LUMO are trademarks of QImaging. PVCAM

is a registered trademark of Roper

Scientific, Inc. Product names mentioned in this document may be trademarks or registered trademarks of
QImaging or other hardware, software, or service providers and are used herein for identification purposes
only. Microsoft

and Windows

are registered trademarks in the U.S. and other countries of Microsoft

Corporation and are used herein for identification purposes only.

QImaging Corporation Address Information

19535 56th Avenue,
Suite 101
Surrey, BC, Canada V3S 6K3
+1.604.530.5800

www.qimaging.com

QImaging Technical Support

Technical support is available to all registered users of QImaging products from 6am to 5pm Pacific Standard
Time.

[email protected]

+1.800.874.9789

http://www.qimaging.com/support/contact

Summary of Contents for RETIGA LUMO



























Search results

Summary of Contents for RETIGA LUMO

Reviews:

Q Imaging RETIGA LUMO, User Manual, Page: 2 / 28

Search results

Summary of Contents for RETIGA LUMO

Reviews: