4
CHAPTER 2
INSTALLATION
Step 1. Install the 1394 PCI card (Windows Users Only)
This step is for Windows PC users only. If you are installing the Retiga 4000R on a Mac OS computer,
please skip to Step 2.
Check your computer for an existing Firewire port:
The Retiga 4000R connects to your Windows PC via a Firewire port. If you already have a Firewire
port, you do not have to install the IEEE 1394 PCI card. Check the connectors at the back of your PC
for a port that matches the Firewire ports on your camera (Figure 1 and Figure 2).
Figure 1—
6-pin to 6-pin Firewire (IEEE 1394) Port connection
Figure 2—
6-pin to 4-pin Firewire (IEEE 1394) Port connection
IMPORTANT: Follow these steps
in order
to complete the installation.
DO NOT CONNECT the camera until the camera driver is installed.
1. Windows PC users only: Install the IEEE 1394 PCI card -
only if necessary.
2. Imaging Software - Install the software and drivers that your new QImaging
camera needs to capture images.
3. Retiga 4000R
- Connect the camera to your computer using the supplied IEEE 1394
cable.
DO NOT CONNECT the camera until you have a functioning Firewire port in
your computer and the camera driver is installed.
Camera
Computer
Camera
Computer
Summary of Contents for Retiga 4000R
Page 1: ......
