Q Digital Q-RB6 User Manual Download Page 7

Trouble shooter 

 

 

None of the headsets are 
working 

1. Check the base station (Q-RB) has power LED on. 

2. Check the battery charger has power LED on. 

One or more headsets not 
working 

1. Make sure it is fully charged. Check Led on the 
headset flashes intermittently when out of charger. 

2. “Out of range” message: make sure you are within 
range of the base station.  

3. “Registration incomplete” message: re-register the 
head set with the base station.  

One of the headsets isn’t 
working, it’s registered 

within range and it is fully 
charge. 

Headset may have a faulty circuit board. Call your 
service provider for repair or replacement. 

Battery life has 

deteriorated and not 
lasting as long as when 

new. 

New batteries should last between 6 to 8 hours in 

operation. If this period is reduced considerably, 
please replace your batteries by contacting your 

service providers. Quail Digital recommends changing 
the batteries every 12 to 18 months.  

Headset won’t log on 
during registration process 

Make sure the maximum number of headsets allowed 
in the system has not been exceeded. The standard QD 

system is for 6 headsets this is the case if you have a 
Q-RB6 base station model. 

How do I get more head 

bands and ear foams or 
any other spare part of the 

system. 

Contact your service provider or 

www.quaildigital.com

 

or 

[email protected]

 

 
 
 
 
 
 
 

Quail Digital, 92 Lots Road, London, SW10 0QD,  

E: 

[email protected]

 W: 

www.quaildigital.com

 

Summary of Contents for Q-RB6








Reviews: