Registration process
Before using the system each headset needs to be registered to the base station.
Thereafter, any new or additional headset you want to use with the system has to be
registered. The base station takes a finite number of headsets, 6 is standard
although base stations with capacity of up to 12 headsets are available.
When registering one or more new headsets, follow this procedure:
1.
Make sure the new headset(s) has been in the charger and is/are charged.
2.
Collect up all the headsets in use on the system making sure they’re in range of
the base station. If a headset isn’t in range during the registration process it will
be deleted from the system.
3.
Either by pressing the registration button on the base station, or, standing in
range of the base station, press the registration switch on the hand held key pad.
The blue led on the base station will Flash.
4.
Put new headset(s) only in registration mode by placing the headset on your right
ear and pressing large silver switch and volume toggle down
for a second. Wait
for the “headset in registration mode” message to play in your ear.
5.
Voice message ‘headset registered’ signifies successful registration.
6.
You may also hear an “initialising” message before a double blip tone that will
indicate it is ready to use.
7.
As soon as headset(s) is/are registered the system is ready to use. Press
registration switch again to complete registration process.