5
/ SLOW / -FAST / -NORMAL / -SLOW in which the
first three grades are scan less than 180° while the
later three grades larger than 180°. Adjust speed by
PAN LEFT/PAN RIGHT, and operate and exit by
OPEN button. The start position and the end position
of auto scan are set by options 1 and 2 in this
submenu.
2.6.4 SET TITLE: to edit titles of preset position. Only
previous 63 preset points have their titles. Select no.
of preset point by PAN LEFT/PAN RIGHT, enter
into edit by OPEN button and exit edit by CLOSE
button. Operations under edit state can be seen later.
2.6.5 SET PATROL: to edit data for multi-points patrol.
Select no. of patrol by PAN LEFT/PAN RIGHT, enter into edit by OPEN button and
exit edit by CLOSE button. Operations under edit state can be seen later.
2.6.6 RUN PATROL: to run multi-points patrol function. Select no. of patrol by PAN
LEFT/PAN RIGHT, run and exit by OPEN button.
2.6.7 RECORD PATTERN:
This pattern can consist of any standard pan and tilt or lens
command. Presets, flip, digital zoom, proportional pan, and turbo are not allowed in a
pattern. The pattern length is
40 seconds in maximum. To return when 40 seconds
expire or by push CLOSE button.
2.6.8 RUN PATTERN: to self-learn loci of tour. To exit the menu after running or to stop
running by joystick.
2.6.9 RETURN: return to Main Menu.
3. Appendix to the Menu
3.1 Operation of Edit State of Multi-Points Patrol.
When entering into edit state the
screen displays as follows:
NO – serial No. of patrol position
POS – No. of preset position
SP – leaving speed
TM – dwelling time
After entering into edit area, screen shows as follows:
Edit Area, data of 2 patrol position appears on one
line.
SEQ:01
– It means the set No.1 patrol
CLOSE:EXIT – Push CLOSE to exit edit state
Both top and bottom lines display prompt and information of each patrol is displayed on
the middle of the screen.
Data of 2 Patrol points appears on one line.
Move cursor by
PAN LEFT/RIGHT and modify data by TILT UP/DOWN. Press buttons for one second
to speed up operation. Press CLOSE button to exit edit state and store modifications.
The program will search the position of the first “---” of POS, store dada before it and
regard data after it as invalid. In above figure, the program stores previous four points
with settable range from 1 to 63 and from 65 to 128. When “---” of POS appears, the
tour range is ended. The settable range of SP is from 0 to 8 (0 and 1 are the same with
fastest speed while 8 has the lowest speed). The settable range of TM is from 0 to 99
seconds.
3.2 Operation of Title of Preset Point in Edit State.
When entering into edit state the
screen displays as follows:
