8
5.1 MOUNTING VARIANTS
A
2
For Q.SMART UF 1190 x 630 mm²
or Q.SMART 1196 x 636 mm²
A
3
For
Q.SMART UF L 1190 x 789.5 mm²
B
2
For Q.SMART UF 1190 x 630 mm²
or Q.SMART 1196 x 636 mm²
B
3
For
Q.SMART UF L 1190 x 789.5 mm²
INSTALLATION AND OPERATION MANUAL FOR CIGS SOLAR MODULES Q-CELLS SE
FIGURE 2:
Clamping areas and mounting variants for the solar modules (top view).
BEWARE!
The mounting variants also apply for landscape installations.
THE FOLLOWING MOUNTING VARIANTS ARE POSSIBLE:
A
Substructure lateral beneath the module with 2 (A
2
) or 3 (A
3
) clamps per module side
B
Substructure under the long sides with 2 (B
2
) or 3 (B
3
) clamps per module side
With linear support, the modules lie along the lateral sides on the substructure. When using
this mounting variant, place a silicone-free rubber support plate between the substructure and
the clamps.
THE FOLLOWING MOUNTING VARIANTS ARE POSSIBLE:
A
Substructure lateral beneath the module with 2 (A
2
) or 3 (A
3
) clamps per module side
B
Substructure under the long sides with 2 (B
2
) or 3 (B
3
) clamps per module side
Only use approved clamps in accordance with Q-Cells clamp list.
P1
260 ± 50 mm (unframed modules)
260 ± 130 mm (framed modules)
P2
595 ± 30 mm (only Q.SMART UF L)
P3
200 ± 50 mm (only Q.SMART UF L)
P4
Clamp areas
> 70 mm (unframed modules)
> 60 mm (framed modules)
Module
Clamping area
Substructure
P3
P2
POINT SUPPORT
LINEAR SUPPORT FOR
UNFRAMED MODULES
P1
P4
P1
P4
P3
P2
P4
P4