2
INSTALLATION AND OPERATION MANUAL CRYSTALLINE SOLAR MODULES Q-CELLS SE - AUSTRALIA
1
INTRODUCTION
PAGE 3
2
PRODUCT DESCRIPTION
PAGE 4
3
SAFETY INSTRUCTIONS
PAGE 5
3.1 TRANSPORT AND STORAGE
PAGE 5
3.2 APPLICABLE AUSTRALIAN CODES AND STANDARDS
PAGE 6
4
AREA OF USAGE AND INSTALLATION LOCATION
PAGE 6
5
LAYOUT, MOUNTING AND INSTALLATION
PAGE 7
5.1 MOUNTING VARIANTS
PAGE 8
5.2 MECHANICAL MOUNTING
PAGE 9
5.3 ELECTRICAL LAYOUT
PAGE 10
5.4 GROUNDING
PAGE 11
5.5 ELECTRICAL INSTALLATION
PAGE 11
6
CLEANING AND MAINTENANCE
PAGE 12
7
TROUBLESHOOTING
PAGE 13
8
DECOMMISSIONING AND RECYCLING
PAGE 13
9
CONTACT
PAGE 14
Technical parameters and design are subject to change. The data sheets and client information valid at the point in time when the relevant
module was manufactured apply for the carrying out of installation, mounting or maintenance work on the solar modules.
DOCUMENTREVISION 01
This document applies for Australia for the following products as of December 2010:
Q.PRO, Q.BASE, QC-C05, and replaces all previous revisions of the installation and operation manual for these solar modules.
