Q CELLS Q.HOME+ ESS HYB-G2, User Manual

Page: 57 / 60

P01P Unknown Unregistered Failure It is an unregistered fault. Turn off and restart
the system. Please contact the Q CELLS
Service –Hotline, if an error occurs
continuously.
P03P DSP-EMG
TRIP P
DSP-Emergency
Trip Protection Please check emergency switch.
Type : PROTECTION
WEB Display HMI Display Description Measures
6.7.3 System General Events (Protection)
P11P ADC P ADC Measure Error
Protection Please turn off and restart the system.
If an error occurs repeatedly, it is necessary
to replace the Control Board.
P12P DSPM
UPDATE P
DSP Master Remote
Update Fail Protection Please update DSP Master software again.
P13P DSPS
UPDATE P
DSP Slave Remote
Update Fail Protection Please update DSP Slave software again.
P14P PMS
UPDATE P
PMS Remote Update
Fail Protection Please update PMS software again.
[ Table 6-13 : System General Events Protection List ]
P15P DSP VER P DSP Firmware Version
Error Protection DSP and PMS versions are different.
Please re-install the DSP software.
P16P PMS VER P PMS Firmware Version
Error Protection Please update DSP Slave software again.
P21P DSPM
FRAM P
DSP Master FRAM
Communication Error
Protection Please turn off and restart the system.
If an error occurs repeatedly, it is necessary
to replace the Control Board.
P22P DSPS
FRAM P
DSP Slave FRAM
Communication Error
Protection Please turn off and restart the system.
If an error occurs repeatedly, it is necessary
to replace the Control Board.
P23P DSP COM P DSPM-DSPS
Communication Error
Protection It is an unregistered fault. Turn off and restart
the system. Please contact the Q CELLS
Service–Hotline, if an error occurs
continuously.
Arrangement of Terms
I 50