Q Acoustics M20, Manual

Page: 6 / 7

9 10
Operation
The M20 system is warranted free of defects in
materials and workmanship for a period of 1 year
from the date of purchase. During the warranty
period Q Acoustics will, at its option, repair or
replace any product found to be faulty after
inspection by the company or its appointed
distributor or agent.
Misuse and fair wear and tear are not covered by
warranty.
Goods for repair should in the first instance be
returned to the supplying dealer. If this is not
possible contact Q Acoustics or their appointed
distributor for your area to determine the correct
warranty procedure. If possible the original
packaging should be used to return the product
as damage sustained during transit to the repair
centre is not covered by the warranty. The
warranty does not in any way affect your legal
rights.
Amplifier performance
Power output ............................................2 x 44W//4Ω
THD (at rated power) ..............................................<1%
Freq resp (DSP set flat) ........20Hz to 20kHz ±0.5dB
S/N ratio (aux, A-Wtd, max vol, ref 1W) ..... >-94dB
Analogue input sensitivity (for 44W) ..........480mV
Analogue input overload ...................................2.35V
Minijack input sensitivity (for 44W) .............290mV
Minijack input overload ........................................ 1.4V
Sub out (100Hz, at 44W main channels) ......... 1.4V
Optical in ............................................................... Toslink
Optical in sample rate range ................................
???k
USB in sample rate range ...................................... ???k
Speakers
Enclosure type ...........................................2-way reflex
Mid range driver ........................................125mm (5”)
Tweeter ...................................................... 20mm (
25
/
32
”)
Crossover frequency ..........................................2.4kHz
Frequency response ..................................................
???
Power
Supply voltage ........................100V - 240V, 50-60Hz
Maximum consumption ........................................
??W
Standby consumption ...............................<0.5 Watts
Bluetooth®
Bluetooth specification ........................................ V????
Music enhancements .................... aptX HD®, AVRCP
Dimensions
(W x H x D) ....................170mm x 279mm x 296mm
6
11
/
16
” x 11” x 11
5
/
8
”
Weight
Amplified speaker ................................................. 5.5kg
12lb 2oz
Passive speaker ...................................................... 5.1kg
11lb 4 oz
Warranty can be extended to 2 years by
registering your product at -
www.qacoustics.co.uk/register.
Specification
Warranty
LED states
Red System is in standby
Dark red System is in deep standby
White System is playing optical source
White, flashing Adjusting volume
White, double flash every 3 seconds The optical input is receiving multichannel or dolby digital
audio which cannot be played
Blue System is playing Bluetooth source
Blue flashing Bluetooth pairing mode
Blue, triple flash The Bluetooth pairing list has been cleared
Green System is playing analogue source
Yellow System is playing USB source
Source colour (white, blue, green,
yellow) pulsing
Muted
Accessories
Contact
Contact
Q Acoustics
Woodside 2
Dunmow Road
Bishops Stortford
Hertfordshire, UK
CM23 5RG
Knowledge base
For any additional info not contained within
this manual, support questions and/or requests,
please visit our on-line Knowledge Base Portal at:
www.qacoustics.co.uk/faqs
3000iWB wall bracket 3000iWB adjustment angle 3000i stand
Dimensions (WxHxD):
70 x 159 x 99mm
2
3
/
4
” x 6
9
/
32
” x 3
7
/
8
”
5 - 45mm
3
/
16
” - 1
13
/
16
”
35° 35°
Dimensions (W x H x D):
250 x 682 x 290mm
9 7 /
8
” x 29 13 /
16
” x 1 17 /
16
”